CapStar-100型 CO2 分析仪
2019/08/15
详细内容
潮气末CO2分析仪是闻名于世的可靠的呼吸状态测量仪器，是最受欢迎的仪器。CapStar-100型CO2分析仪提供呼出CO2的连续测量，在0-10的范围，其快速的响应时间，小的样品流量要求和长期稳定性使其成为啮齿类动物和较大动物理想的呼吸测量。
主要特点：
● 潮气末峰和连续读数
● 低的样品流量要求
● 精确稳定的监测
● 线性输出信号记录
主要技术参数：
分析仪类型 | 红外单光束 |
样品室材料 | 蓝宝石和不锈钢 |
进样口接头 | 外径1.6mm铜管 |
推荐的样品管尺寸 | 内径1mm-1.6mm聚乙烯管 |
测量范围 | 0-10% CO2 |
模拟输出比例 | 100mV/% CO2 (0-1V) |
线性度 | 0.1% CO2 |
重复性 | 0.1% CO2 |
响应时间(T10-T90) | 100ms(100ml/分取样) |
响应时间(T10-T90) | 130ms(50ml/分取样) |
响应时间(T10-T90) | 250ms(30ml/分取样) |
零点稳定性 | 0.1% (8 hours), 0.2% (24 hours) |
工作温度 | 5-40°C |
预热时间 | 5 分钟 to 0.2%, 10 分钟 to 0.1% |
取样流量计 | 10 - 50 ml/分钟 |
样品室最大压力 | ±5 psig |
干扰影响：50% N2O | .0.1% at 0% CO2, 0.6% at 5% CO2 (未补偿) |
一氧化二氮补偿(internal jumper for 25, 50, 75) | 0.1% at 5% CO2 |
控制装置 | 零、跨度(10个转盘设置) |
电源 | 120VAC/220VAC, 可切换开关 35VA |
主机尺寸 | 23 x 13 x 23 cm |
传感器装置尺寸 | 7.6 x 6.4 x 7.6 cm |
重量 | 4.5kg |
应用：
• Respiratory monitoring
• Use with ventilated or unassisted animals
• Suitable for rats and larger animals
• Control of breathing & sleep studies
气体分析仪附件：
gas analyzer accessories | ||
11-01101 | AccPack | Gas analyzer accessory pack, 1 sample line, 2 Nafion® lines |
11-01102 | Sample Line - 48 | Sample line, 4' (48 in), with male Luer-loc® connectors |
11-01103 | Nafion - 24 | Sample line, 2 feet, Nafion® (evaporates condensed moisture), Luer M-F |
11-01111 | Nafion - 6 | Sample line, 6 inches, Nafion® (evaporates condensed moisture), Luer M-F |
11-01108 | Filter | In-line miniature hydrophobic filter, 13mm dia, Luer fittings, pk of 5 |
11-01109 | Sample Cell | Replacement sample cell |
11-01113 | Y-Adapter Small | "Y" tubing adapter for 1/16" (1.5mm) flex tubing, pack of 5 |
11-02000 | Gas Analyzer Pump Kit | Replacement air pump kit for CAPSTAR-100, GEMINI, OxyStar, MM-100 |
15-00100 | 1 Meter Tubing Set | Sample Tubing Set for microCapstar, 1m, with connector kit |
15-00110 | 2 Meter Tubing Set | Sample Tubing Set for microCapstar, 2m, with connector kit |
11-01112 | 7 Meter Tubing Set | 7 meter tubing set for microCapStar |
15-01101 | microCapStar Accessory Kit | Includes 6' 0.062" dia tubing, 3 in-line disk filters, 2 ea "X", "Y", and "T" 0.062" ID tube fittings |